When you are ready to remove, we recommend 2 different techniques, you can decide what works best for you!

If you remove your QuickLashes correctly the removal will be completely damage free. If you notice a couple of your natural lashes in with the segments whilst removing please don't panic as your natural lashes shed daily so you have not pulled them out it was just their time to fall out naturally.

  1. Brush our remover over the top & bottom of the QuickLashes, then close your eye and keep brushing over your lashes in a downward motion  repeating until the QuickLashes gently slide away.
  2. Or you can apply a generous coat of remover to your lashes, Wait 20/30 seconds, get a cotton pad & wipe to remove. Repeat if needed.

Once you have removed the QuickLashes you will have bond residue on your natural lashes, repeat the above on your natural lashes until they are free from residue.

Do not apply a new set of QuickLashes without cleaning your lashes & eye area first to make sure they are free from remover residue. If there is any remover residue left on your natural lashes you will not successfully be able to apply a new set.

If you want to clean your QuickLashes to re use - you are able to do this!  Most importantly when you clean them to reuse they need to be completely free of the remover residue before re applying as the remover is oil based & oil breaks down the bond so if you still have ANY remover residue on the lashes they will not re apply. There are a few methods we use to clean our QuickLashes but most of our customers prefer to clean them with Isopropanol Alcohol. There are video tutorials available on our TikTok & Instagram demonstrating this. The best way is to fill a pot with Isopropanol Alcohol